PVC Solvent Wet R Dry Blue – Various Sizes


WELD-ON® 725™ Wet ‘R Dry™ is an aqua blue, low VOC emission, medium bodied, extremely fast setting, high strength PVC
solvent cement for all classes and schedules of pipe and fittings with interference fit through 6 inch (160 mm) diameter, Schedule
80 through 4 inch (110 mm) diameter.


WELD-ON 725 Wet ‘R Dry is for use on rigid and flexible PVC pipe and fittings. It is specially formulated for applications where conditions are wet and/or quick pressurization is desired. It was developed to answer specific needs in irrigation, plumbing, and/or pool &
spa. Can be used without primer on non-pressure systems if local codes permit. Although any WELD-ON primer may be used, we
suggest the use of fast acting WELD-ON P-75™ Wet ‘R Dry™ primer in combination with this solvent cement.
Detailed directions on making solvent cemented joints are printed on the container label. An installation DVD/CD covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage
and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting
manufacturer. NOTE: WELD-ON solvent cements must never be used in a PVC system using or being tested by compressed air or gases;
including air-over-water booster.

Available sizes:

Item number PV-275270 – PVC Glue Weld-On 725 Wet ‘R Dry 118ml

Item number PV-275265 – PVC Glue Weld-On 725 Wet ‘R Dry 237ml